Nicorex Ambassador e-cigarette
Nicorex Ambassador is an elite range combining high-end design and functionality. This elegant e-cigarette uses dual- coil technology(BDC) to produce more vapour without burnt taste. The replaceable coil is attached directly to the 650mAh battery making this e-cigarette extremely compact. The monolithic surface of the surface is made of wear resistant material.
For filling, unscrew the casing of the atomiser while turned upside down and in the same position fill the container with e-liquid up to the edge of the air tube in the centre. Then, screw the casing back on the battery and position the e-cigarette upright. If filled for the first time, let the liquid absorb in for 5 minutes. The e-cigarette has a button lock which is activated and deactivated by five quick consecutive presses.
For charging, connect the supplied mini-USB cable to the socket on the side of the e-cigarette battery. Connect the other end of the cable to a computer's USB port or wall adapter (not included). The LED light on the battery button flashes in 3 different colours to indicate the start of charging. The battery is full once all the lights go out. The e-cigarette can be used during charging!
The battery has a trichrome LED indicator which changes colour according to remaining battery capacity (white "50-100%", blue "10-50%", red "below 10%").
The kit includes:
Mini-USB charging cable
Further, read the FAQs and answers on e-cigarettes > > >
* The useful life of all batteries is 300 charging cycles. This means that charging for even 5 minutes counts for one charging cycle. To ensure complete charging cycles we recommend using the battery until empty and only then charging. Further, we recommend that you always use two batteries to enjoy complete convenience of use: while one battery is in use, the other is being charged.
* It takes approximately 1.5 hours to charge a 650 mAh battery using the 220V USB adapter!